Wood/Sawdust Pellet Plant

Raw Materials: shavings, wood chips, bagasse, and other wood processing waste, etc.

Description Of Wood/Sawdust Pellet Plant

The wood pellet plant is to produce wood pellet using wood processing waste, the production line includes a wood crusher, wood chip dryer, glue mixer, and wood pellet forming machine. The produced wood pellet has high hardness, smooth surface, and good waterproof.

Applied Materials Of Wood/Sawdust Pellet Plant

The raw material for the production of wood pellet bedding can be shavings, wood chips, bagasse, and other wood processing waste, after recycling, reprocessing, and again to create benefits, the raw material for the production of wood pellet bedding has requirements for humidity and size, the size is too large need to use the wood crusher for crushing, the size after crushing should be 6-8mm, moisture less than 12%.

Finished Pellets

After crushing, it is pressed into rod-shaped particles, a new type of fuel to replace coal

Wood/Sawdust Pellet Plant Production Process

The production of hookah charcoal mainly includes the steps of carbonization, crushing, mixing, molding, and drying.

①. Crusher

The size of the raw material used for the production of wooden pellet pads must be guaranteed to be 6-8 mm

②. Sawdust Dryer

The dryness requirement is less than 12% moisture content

③. Pellet Block Forming Machine

The wood pellets will have higher density and hardness after hot press molding.

④. Cooling Machine

The high temperature particles enter the cooler for cooling through the conveyor belt

⑤. Finished

The cooled pellets enter the packaging machine for packaging

Advantages Of Wood/Sawdust Pellet Plant

The density of the finished product can be 550-1000m3, which can be chosen according to your needs.
Free of fumigation. Because the foot pier is formed by extrusion under high temperatures, it is fumigation-free
Efficient recycling of waste wood