Ball press machine installation configuration

The installation and configuration of the metallurgical ore powder briquetting machine are crucial. The feeding part aims to achieve quantitative feeding to ensure even material distribution between the rollers. A spiral feeding device, driven by an electromagnetic speed-regulating motor, is used to force the material into the main feed port through a pulley and worm reducer. The constant torque characteristics of the electromagnetic speed-regulating motor allow for maintaining a constant supply pressure when the amount of material pressed by the screw feeder matches the requirement of the host machine, ensuring stable pellet quality.

The transmission part of the briquetting machine consists of an electric motor, triangle belt, reducer, open gear, and roller. The main engine is powered by an electromagnetic speed-regulating motor, which passes through the pulley and cylindrical gear reducer, and is transmitted to the driven shaft through a pin coupling. The driven shaft and the passive shaft run synchronously via open gears. A hydraulic device is installed behind the passive bearing seat. The hydraulic protection device injects high-pressure oil into the hydraulic cylinder through a hydraulic pump, causing axial displacement of the piston. The front end of the piston rod rests on the bearing seat, meeting the production pressure requirements.

During the installation of a metallurgical ore powder briquetting machine, several configuration considerations are important. Simultaneous unloading and spraying should be performed, with cleaning of the unloading shed walls while unloading the truck. Two nozzles with different angles can be installed on both sides of the walls to ensure coverage. The spray should cover the rotation range of the screw head, and nozzles should be rationally arranged on both sides of the screw head and the lifting mechanism to fully cover the coal flow direction and achieve effective dust removal. High-pressure hoses can